A comprehensive range of sputtering materials and sizes available
Micro machined components in strategic materials such as molybdenum, tantalum, titanium and niobium
Garnet crystals and substrates for epitaxy
We supply high purity evaporation materials for vacuum vaporation in a variety of shapes and sizes.
Indium and gallium antimonide. The InSb detectors are sensitive between 1 µm to 5µm wavelengths.
Czochralski (Cz) and float zone (Fz) for a large range of semiconductor applications
Scratch, indentation and wear testing all on one tool at nano and micro load ranges
3D non-contact profilometers for collecting and analysing sample height data
Robust, modular, and powerful pin on disc tribometers
Non-contact technology measuring real time strength and direction of electrical currents
Reproducing the wear interaction between a surface and the human finger
Measurement of surface tension between liquids and solids
Determining thin film properties by change in polarisation of light
Measuring thin film properties by reflection
Tribology testing in ambient or tailored environments
Real life testing of finished products in respect of resistance to hand abrasion
Scratch & indentation for hardness, elastic modulus, adhesion, cohesion plus more
Gain a deeper understanding of your materials
Measure surface roughness, form, profile, finish plus more
Low damage plasma enhanced chemical vapour deposition
Low damage etching and nano structuring
Deposition of layers in the nanometer scale
Deposition of coatings by the vacuum evaporation technique
Deposition of coatings by the sputtering technique
The dispersion, mixing, pulverization or emulsification of materials
Scintillator materials grown in crystal form
Scintillator material in organic form
Materials for the measurement of radiation dose
Sapphire in sheet, tube, rod and component form
LiF, Quartz or SiO2, InSb, Si, Ge, PET, ADP, Beryl, TlAP, RbAP, KAP and CsAP
Bespoke leak testing systems for small or large parts
High performance laser optics from Alpine Research Optics
Powerful, easy to use and cost effective AI based image recognition
A comprehensive solution for laboratories using several types of microscope and profilometer
Benchmark technology for 2D and 3D surface texture analysis and metrology, seamlessly integrates with profilometers and other surface measuring equipment
Conductive coating on one side to prevent EMI/RFI
Plastic optical filter with broadband AR coating on both sides
Privacy Glass & Light Control Film
The T50 tribometer from Nanovea is designed to deliver cutting edge pin on disc tribology in a compact and affordable benchtop design.
With a variety of modular test and environmental configurations available up to loads of 50N (optionally 60N) the T50 has been designed with flexibility in mind.
Robust, low maintenance and easy to use with minimal requirements for calibration.
Nanovea Inc are based in Irvine, a tech hub of Southern California. They have been redefining standards in quality control and materials development internationally for over a decade. Nanovea’s instruments can be found in renowned education and industrial organisations around the world.
The T50 is truly modular meaning you can start with test and environmental modules or easily add them later. There is no need to buy more than one tribometer for different tests and conditions because all can be completed on one T50.
The T50 uses free weights to apply a load of up to 50N (optionally 60N) onto the sample. This is a robust, simple and cost effective way of applying the load and ideal for where budgets are limited.
Min/Max Testing Loads | 100mN-60N |
Load Resolution | 10mN |
Loading Type | Weights |
Frictional Force Maximum | Resolution | (+/-)20N | 2.4µN |
X Motorized Travel | 50mm |
Max Rotational Speed | 5000rpm (optionally 15,000rpm) |
Min Rotational Speed | 0.01rpm (0.05rpm with 15,000rpm motor) |
Rotational Speed Acceleration (0 to 1000rpm) | 0.45 seconds (0.15 sec with 15,000rpm motor) |
Disc Size / Sample Mounting Area | 100mm diameter |
Linear Stroke Range | 25mm |
Maximum Linear Frequency (up to 5mm stroke) | 60Hz |
Linear Mounting Area | 62 x 76mm |
Nanovea regularly document and publish work using their tribometers. We keep many of these resources on our website in the form of application notes or publications. These are a great way to learn more about what can be achieved with a Nanovea tribometer.
We’re here and ready to provide information and answers to your questions
©Mi-Net 2023. All Rights Reserved.
Website by Fifteen.co.uk